Make Your Own Resin River Serving Tray | At-Home Kit With Instructions
For the at-home maker — everything you need to make your own epoxy resin river serving tray.
Detailed video lesson included, plus full support.
Can’t make a Beers and Boards class? Don’t like big groups? Prefer one-on-one instruction?
The at-home kit includes what you need to pour an epoxy serving tray, plus access to a private, step-by-step video that walks you through the steps.
Planer not necessary!
Choose from 8 pigment colors, as shown in the picture. Yes, you CAN choose two!
Get stuck? Pull the ripcord and send it back to be finished.
This kit is designed for the Let’s Resin, Large Rectangle Mold (sold separately HERE).
In the Box:
Links to instructional video and finishing video.
Two pieces of walnut, cherry or birch, cut to 17 inches.
32 oz epoxy resin kit (16 oz epoxy, 16 oz hardener).
Your choice of pigments.
1 large mixing cup.
Safety glasses and disposable respirator.
Level / shims / tongue depressors / gloves and toothpicks.
Shellac flakes
Contact paper.
Setup and finishing instructions.
You provide:
Let's Resin, Large, Rectangle Table or Serving Tray Mold (or similar)
Hair dryer or heat gun.
Orbital sander (unless you’re choosing Ripcord Option)
Various grits of sandpaper
Four 3-pound weights or clamps. Bricks will also work.
Smock or shirt you don't care about.
A half-pint of 190-proof, clear alcohol (not for drinking).
Optional:
Electric Mixer
Router
Scrap Piece of plywood as large as the mold.
FREE SHIPPING
Note: Let’s Resin epoxy is not yet FDA approved for direct contact with food.
For the at-home maker — everything you need to make your own epoxy resin river serving tray.
Detailed video lesson included, plus full support.
Can’t make a Beers and Boards class? Don’t like big groups? Prefer one-on-one instruction?
The at-home kit includes what you need to pour an epoxy serving tray, plus access to a private, step-by-step video that walks you through the steps.
Planer not necessary!
Choose from 8 pigment colors, as shown in the picture. Yes, you CAN choose two!
Get stuck? Pull the ripcord and send it back to be finished.
This kit is designed for the Let’s Resin, Large Rectangle Mold (sold separately HERE).
In the Box:
Links to instructional video and finishing video.
Two pieces of walnut, cherry or birch, cut to 17 inches.
32 oz epoxy resin kit (16 oz epoxy, 16 oz hardener).
Your choice of pigments.
1 large mixing cup.
Safety glasses and disposable respirator.
Level / shims / tongue depressors / gloves and toothpicks.
Shellac flakes
Contact paper.
Setup and finishing instructions.
You provide:
Let's Resin, Large, Rectangle Table or Serving Tray Mold (or similar)
Hair dryer or heat gun.
Orbital sander (unless you’re choosing Ripcord Option)
Various grits of sandpaper
Four 3-pound weights or clamps. Bricks will also work.
Smock or shirt you don't care about.
A half-pint of 190-proof, clear alcohol (not for drinking).
Optional:
Electric Mixer
Router
Scrap Piece of plywood as large as the mold.
FREE SHIPPING
Note: Let’s Resin epoxy is not yet FDA approved for direct contact with food.
For the at-home maker — everything you need to make your own epoxy resin river serving tray.
Detailed video lesson included, plus full support.
Can’t make a Beers and Boards class? Don’t like big groups? Prefer one-on-one instruction?
The at-home kit includes what you need to pour an epoxy serving tray, plus access to a private, step-by-step video that walks you through the steps.
Planer not necessary!
Choose from 8 pigment colors, as shown in the picture. Yes, you CAN choose two!
Get stuck? Pull the ripcord and send it back to be finished.
This kit is designed for the Let’s Resin, Large Rectangle Mold (sold separately HERE).
In the Box:
Links to instructional video and finishing video.
Two pieces of walnut, cherry or birch, cut to 17 inches.
32 oz epoxy resin kit (16 oz epoxy, 16 oz hardener).
Your choice of pigments.
1 large mixing cup.
Safety glasses and disposable respirator.
Level / shims / tongue depressors / gloves and toothpicks.
Shellac flakes
Contact paper.
Setup and finishing instructions.
You provide:
Let's Resin, Large, Rectangle Table or Serving Tray Mold (or similar)
Hair dryer or heat gun.
Orbital sander (unless you’re choosing Ripcord Option)
Various grits of sandpaper
Four 3-pound weights or clamps. Bricks will also work.
Smock or shirt you don't care about.
A half-pint of 190-proof, clear alcohol (not for drinking).
Optional:
Electric Mixer
Router
Scrap Piece of plywood as large as the mold.
FREE SHIPPING
Note: Let’s Resin epoxy is not yet FDA approved for direct contact with food.
